No Irons machines Turbocart Rotary Tattoo Machine/RCA. Not Kubin, Soba or Cain!

Description

No Irons machines Turbocart Rotary Tattoo Machine/RCA. Not Kubin, Soba or Cain!.
SPECIFIC TUNED TO RUN ONLY CARTRIDGES
-Aluminium frame to optimize vibrations
-177 gr. weight
-Powerful 12 volts big motor
-Recommended to run at 9-10.5 volts, go up till 11.5 volts with big mag for blackwork, slow down at 7.5 volts for stipple shading with lineer needles
- RCA only for use anything you prefer including a Battery pack or rca cord.
-Adjustable stroke up to 4.2 mm, simple turn the back Black Wheel with fingers to adjust the stroke, no tools required
-The machine come tuned at maximum stroke
-Hitting screw on the bar, if you don't want hear the punchy sound just unscrew a bit and the bar gonna hit directly on the 2 orings and still have lot of punch
-For Cartridges, just add the front oring between frame and bar , use a medium 90 mm needles push bar
-If you like extra punch without increasing the voltage, just add to the bar the Brass heavy screw, more weight more punch
-The machine is tuned at 9.2 volts with a 18 loose Regular liner needles and stainless steel tube, tested with a professional Strobolight eqipment to calculate the exactly speed , THIS IS NOT THE MOTOR SPEED UNLOADED THAT FACTORY GIVE YOU AS SPECIFIC, IS THE REAL EXACTLY SPEED THE MACHINE RUN WITH NEEDLES SETUP
-9.2 volts, 5400 rpm/90 hz
-10.5 volts, 6000 rpm/100 hz
-11.6 volts, 6600 rpm/110 hz
-It come with a extra Spring, Brass heavy screw, Cartridges oring and hexagon key 1.5 mm
-ONLY USE HARD GROMMETS OR PAPER, CHEAP SOFT GROMMETS SNAP EASY
-NEVER RUN WITHOUT NEEDLES AND TUBE SETUP
-NEVER RUN HIGHER THAN 12 volts AND LOWER THAN 7 volts, FOR THE MOTOR SAFETY
-NEVER PUT OIL, GREASE OR ANY OTHER LUBRICANTS IN ANY MACHINE PARTS
-NEVER SPRAY ANY GERMICIDAL DIRECT ON THE MACHINE, TO CLEAN SPRAY ON PAPER TOWEL AND WIPE GENTLE THE MACHINE, ALL LIQUID THAT CREATE CORROSION GONNA REDUCE THE LIFE OF ALL THE MECHANICAL PARTS INCLUDED BEARINGS AND MOTOR
Gray Machine, looking to downsize because I got too many machines. For professionals only, happy shopping :)